Cover image is courtesy of Valeria Boltneva – https://www.pexels.com/@valeriya/ Celebrating Halloween – Halloween, less commonly known as Allhalloween or All Hallows Eve or All Saints Eve is celebrated in many
Tag: STEM Education
End of Term 2 2024 @ CoderDojo Altona North
We have ended Term 2 here at CoderDojo Altona North, are on a short term break. A big thanks to all our dedicated volunteers here at CoderDojo Altona North without
Experimenting With Bluetooth & Otto DIY Biped Robot
What is the Otto DIY Biped Robot – Otto is completely open source, Arduino compatible, 3D printable robot which you can put together yourself. This is robotics and opensource at
Getting Into Robotics, Electronics Was Never This Easy
I have the privilege of organizing the sessions every month at the Melbourne Raspberry Pi Makers Group (MRPMG) which we have been running for the last 6+ years with the
Airplane Launcher Challenge – CoderDojo Altona North
I find aviation thoroughly fascinating and through my adult years I’ve always been intrigued by the physics of flight. I am hoping today’s challenge ignites an appreciation for the physics
HAB & STEM At AntennaPalooza 2023
What is Antennapalooza – Antennapalooza takes place at Drouin West, about an hour’s drive East of Melbourne. Antennapalooza is a different kind of event that brings people together from multiple clubs, creating
CoderDojo Altona North : End Of Term 1 2023
What Is CoderDojo Altona North – CoderDojo is a global movement of free, volunteer-led, community based programming clubs for young people. We are the Altona North (Melbourne, Australia) chapter of
High Altitude Ballooning & STEM : QTC March 2023
Along with input from Mark VK5QI, I helped put together an article for the March 2023 edition of QTC magazine. QTC happens to be RASA (Radio Amateur Society Of Austraila)
Featured within Issue #128 of MagPi – Raspberry Magazine
I have to admit, i had written to Rob Zwetloot at the Raspberry Pi foundation to get an article about High Altitude Ballooning published, however that somehow turned around into
STEM Learning Opportunities Presented By High Altitude Ballooning
Easy to consume, hard to create – I would argue that it’s relatively easy to consume technology, however creating technology takes some effort, creativity, thinking, persistence, experience and patience. The
